Compare Models

Honda Power Equipment WSP100
Honda Power Equipment WSP100

Specs

General Information

Manufacturer
Honda Power Equipment
Honda Power Equipment
Model
WSP100
WSP100
Model Code
WSP100AA
WSP100AA
Color
Silver
Silver

Dimensions

Height
22.8 in.
22.8 in.
Width
9 in.
9 in.
Weight
Dry - 41 lb.
Dry - 41 lb.
Length
Cord - 25 ft.
Cord - 25 ft.

Engine

Horsepower
1 hp
1 hp
Starting System
Automatic
Automatic

Operational

Total Head Lift
Max. - 42 ft.
Max. - 42 ft.
Suction Port Diameter
2 in. FNPT
2 in. FNPT
Maximum Pressure
18 psi
18 psi
Discharge Capacity
150 gpm
150 gpm
Solids Handling
2 in.
2 in.
Impeller
Single Channel Stainless Steel
Single Channel Stainless Steel
Pump

Type - Submersible Trash

Casing - Stainless steel

Diameter - 9 in.

Type - Submersible Trash

Casing - Stainless steel

Diameter - 9 in.

Seals

Lower - SIC / SIC

Upper - Tandem Mechanical Carbon / Ceramic

Lower - SIC / SIC

Upper - Tandem Mechanical Carbon / Ceramic

Discharge Port
Type - Side
Type - Side

Other

Warranty
Residential / Commercial - 1 year
Residential / Commercial - 1 year

Features

Features

  • 1 HP, 115V SUBMERSIBLE TRASH PUMP: 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
  • SOLIDS HANDLING UP TO 2.0": Move slurry and dirty liquids without the worry of damaging the pump.
  • IDEAL FOR DRAINING BASEMENTS, WINDOW WELLS, GARDEN IRRIGATION, DECORATIVE FOUNTAINS AND MORE
  • 150 GAL./MIN CAPACITY
  • RATED FOR CONTINUOUS USE: Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
  • LIGHTWEIGHT, DURABLE STAINLESS STEEL CASING: The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
  • AUTOMATIC NON-MERCURY FLOAT SWITCH: Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
  • BUILT IN THERMAL RESET SWITCH: If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
  • 25 FOOT HEAVY DUTY CORD
  • SIDE DISCHARGE: Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.
  • OPERATES FULLY OR PARTIALLY SUBMERGED: No need to worry about the water level for the pump!
  • SHIELDED BALL BEARINGS FOR ADDED DURABILITY: Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
  • EFFICIENT AIR-INSULATED MOTOR
  • OIL LUBRICATED DOUBLE MECHANICAL SEALS: Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
  • Voltage: 115
  • Starting amps: 47
  • Running amps: 11.1
  • Duty: Continuous
  • Overhead protection: Built-In Thermal Automatic Reset

Features

  • 1 HP, 115V SUBMERSIBLE TRASH PUMP: 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
  • SOLIDS HANDLING UP TO 2.0": Move slurry and dirty liquids without the worry of damaging the pump.
  • IDEAL FOR DRAINING BASEMENTS, WINDOW WELLS, GARDEN IRRIGATION, DECORATIVE FOUNTAINS AND MORE
  • 150 GAL./MIN CAPACITY
  • RATED FOR CONTINUOUS USE: Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
  • LIGHTWEIGHT, DURABLE STAINLESS STEEL CASING: The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
  • AUTOMATIC NON-MERCURY FLOAT SWITCH: Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
  • BUILT IN THERMAL RESET SWITCH: If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
  • 25 FOOT HEAVY DUTY CORD
  • SIDE DISCHARGE: Side discharge submersible pumps offer higher discharge and solids handling capabilities of up to 2 inches.
  • OPERATES FULLY OR PARTIALLY SUBMERGED: No need to worry about the water level for the pump!
  • SHIELDED BALL BEARINGS FOR ADDED DURABILITY: Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
  • EFFICIENT AIR-INSULATED MOTOR
  • OIL LUBRICATED DOUBLE MECHANICAL SEALS: Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
  • Voltage: 115
  • Starting amps: 47
  • Running amps: 11.1
  • Duty: Continuous
  • Overhead protection: Built-In Thermal Automatic Reset